Disculpa, pero esta entrada está disponible sólo en English y Português do Brasil. For the sake of viewer convenience, the content is shown below in this site default language. You may click one of the links to switch the site language to another available language.

USB Connection – Zebra GX430t

 

Updated May 2018

These instructions are for a third-party device that can be configured for the Glue Up platform. Printer, browser, and operating system settings may vary. If you need any assistance, please contact support@eventbank.com.

Important:

  • If you are using an event badge design that has a 4-inch width, the Zebra GX430t printer is your preferred option.
  • If you are using a badge design that has a 3.375 x 2.125 inches, use the Brother QL-720NW printer. Instructions for the Brother QL-720NW printer with a USB connection can be found here.
  • The Brother QL-720NW printer and Zebra GX430t printer each print in black and white.
  • Wireless printing is not available for the Zebra GX430t printer.

 

Checklist for printer setup:

  • Laptop
  • Zebra GX430t printer
  • USB printer cable
  • A working wifi connection

 

Setup Instructions for Printing with USB Printer Cable

When printing from your computer with a USB printer cable, Google Chrome on a Windows PC will facilitate the best user experience. Setup instructions for Mozilla Firefox can also be found below.

The following instructions are for badge paper with a 4-inch width. If you use a different paper size, configure the printer settings as needed.

 

Google Chrome for Windows – Pre-event Setup

The following is for the Google Chrome web browser on a Windows PC. We recommend using the most recent version of the browser. This process only needs to be done once for each computer that will be connected to a printer.

  1. Ensure your badge design in the Glue Up platform has a 4-inch width
  2. Download and install the following driver on your computer: https://www.zebra.com/us/en/support-downloads/printers/desktop/gx430t.html#downloadlistitem_9aa
  3. Connect the Zebra GX430t printer to your computer
  4. Enter your computer’s printer settings and go to ‘Printing Preferences’ for the Zebra GX430t device
    • Click the ‘Options’ tab, go to the ‘Paper Format’ section, and select ‘inch’ and ‘portrait’
    • Click the ‘Stocks’ tab, and click the ‘New…’ button. You may also click the ‘Change’ button if you have an existing label stock you want to adjust.
    • Complete the information in the ‘Define Stock’ popup accordingly:
      • Name – Use the size of your event badge (e.g. ‘4 x 3’ for a 4 x 3 inch badge)
      • Dimensions – Set the ‘Label Width’ to ‘4’ and ‘Label Height’ to the measurement you used in your badge design. The ‘Label Height’ will be ‘3’, ‘4’, or ‘6’.
      • Unprinted Area – Set each of the fields to ‘0’
      • Click ‘OK’
    • Click ‘OK’

 

 

Google Chrome for Windows – Printing Onsite

These settings should be set up and tested prior to event check-in. The following is for the Google Chrome web browser on a Windows PC. We recommend using the most recent version of the browser for onsite printing. If you are using the Mozilla Firefox web browser, please see Mozilla Firefox for Windows – Printing Onsite. Please ensure a wifi network is accessible to use the Glue Up platform.

  1. In the Glue Up platform, go to ‘Standard Check-in’ inside your event.
  2. When you click ‘Print Badge’, a print preview window will appear. The following settings should be selected:
    • Destination– Zebra GX430t Printer
    • Layout– Portrait
    • Click ‘More Settings’and select the following:
      • Paper Size– Select the appropriate label stock size that matches the respective batch you are printing (e.g. ‘4 x 3’ for a 4 x 3 inch badge)
      • Margin– Custom (This must be tested and can be changed as badge designs may vary.)
      • Quality– 300 dpi (This must be tested and can be changed as badge designs may vary.)
      • Scale– 100 (This must be tested and can be changed as badge designs may vary.)
      • Options– Ensure the checkbox for ‘Headers and footers’ is not ticked
  1. Press ‘Print’

 

 

Mozilla Firefox for Windows – Printing Onsite

These settings should be set up and tested prior to event check-in. The following is for the Mozilla Firefox web browser on a Windows PC. We recommend using the most recent version of the browser for onsite printing. If you are using the Google Chrome web browser, please see Google Chrome for Windows – Printing Onsite. Please ensure a wifi network is accessible to use the Glue Up platform.

  1. In the Glue Up platform, go to ‘Standard Check-in’ inside your event.
  2. Click the three-line menu button in the top right and click ‘Print’. In the print preview window click the ‘Page Setup’ button.
    • In the ‘Format & Options’ tab, select the following:
      • Orientation – Select ‘Portrait’
      • Scale – Tick the checkbox for ‘Shrink to fit Page Width’ (This must be tested and can be changed as badge designs may vary.)
    • Click the ‘Margins & Header/Footer’ tab
      • Margins – Set each of the fields to ‘0’
      • Headers & Footers – Set each of the fields to ‘–blank–’
    • Click ‘OK’
  3. Close the print preview window.
  4. When you click ‘Print Badge’, a ‘Print’ settings window will appear. Select your respective printer.
  5. Click the ‘Properties…” button
    • Select the proper label stock.
  6. Press ‘Print’